|
|
 |
- Reduce rejects using better information
-
See what is happening inside your dies
- Measure
cavity pressure directly
- Continuosly monitor
ejection force
- Gain control over the whole
process
- Reduce porosity in your
castings
- Add vacuum to your dies at little extra
cost
- Measure, monitor and control the
vacuum
- Increase the shot rate of your
dies
- Maximum cooling at minimum
cost
- No thermocouples required in the
die
- Control the heat removed from the
die
|
 |
- Speed up
your process design
- Start designing better
dies
- Calculate the optimum runner
sizes
- Design vents that work
- Understand the Thermal Balance conditions
|
|
|
- Reduce remelt from runners
and sprues
- Improve surface finish of the
castings
- Reduce flow turbulance and
porosity
- Available for zinc and magnesium
alloys |
 |
- Process
Feasibility
- Die Layouts
-
Runner Design
- Flow Simulation
- Tooling Components
- Die
Manufacture |
 |
- Maintain stable die
temperatures
- Control each zone
separately
- See all temperatures at a
glance
- Control heating and cooling
- Minimise Warm-Up shots
|
 |
|
