HotFlo!

1-Zone Temperature Controller

Home Page Die Casting Defects Products & Services Company Profile Contact Us

Overview 4-Zone Controller Die Cooling Module 1-Zone Controller Thermocouples Cables Die Plugs Hot Sprue Systems DC-CALC   Die-Shot Monitor Vacuum Die Casting Thermal Control

A rugged and reliable 1-Zone temperature controller specifically for use with hot sprue kits in the Die Casting environment. Clear display of Set Value and Process Value Rugged metal case and cable socket Microprocessor controlled Built-in solid state relay rated to 25 amps Soft-start program to prolong element and sprue bush life K-Type thermocouple standard Suitable for use up to 800 degrees centigrade Temperature Control Kit We can also supply this controller in a kit with a high temperature cable and metal plugs and sockets, and a rugged plug for attachment to the die. For reliable production, we strongly recommend the use of these high quality connectors and cables, with built-in spring clamps. Part Numbers included in the kit: TC101 Controller, 1-Zone TC221 Cable, Die, 4 meters, with metal plug & socket. TC251 Plug, Die, Metal Housing, with dust exclusion lid. Specifications Nominal Power Supply: Single phase, 240V AC, 10 amp Power Supply Range: 200 to 265 Volts AC, 50 or 60 Hz, 10 amp Maximum Load: 2400 watts Power Consumption of Controller: About 4 VA Display Accuracy: Within 0.2% of displayed digit + 1 digit Sampling Time: 250 ms Operating temperature: 0° C to 50° C Storage temperature: -25° C to 65° C Humidity Range: 50 - 85 % RH (dew) Programmable Options The following options can be selected in the controller set-up. Temperature units : degrees Centigrade or Farenheit Mains Frequency : 50 Hz or 60 Hz Thermocouple Type : K or J Temperature range : Many options available. PID Parameters : Manually selectable or Auto Tuning Temperature ramp rate : degrees per minute Temperature soak time : Hours and minutes Over and under temperature alarms Operating Environment This controller is intended for use in Die Casting plants for the control of electric resistance heaters in dies. When installing and using this product observe the following: Avoid direct contact with water. Avoid direct exposure to sunlight on the front of the display panel. Avoid corrosive environments Avoid hazardous areas containing explosive or flammable gasses Avoid vibration and shock Ensure the air temperature in which it operates is not less than 0 degrees Centigrade and not greater than 50 degrees Centigrade. Ensure that the electric power supply to the controller is properly earthed (grounded) to prevent electric shock in the case of malfunction. Ensure that the fuse used in the controller does not exceed 10 amps rating.

TC101 Temperature Controller           Temperature Control Kit

---