Die Dimensions for Series 12
Dimensional data and information to assist Die Designers and Toolmakers to incorporate HotFlo! in hot chamber Die Casting dies:
Code | Description | Dimension (mm) |
---|---|---|
Fixed Die | ||
LF | Thickness, Fixed Die | 50.00 or 80.00 or 100.00 |
L52 | Depth, Heater Clearance | 35 or 65 or 85 |
L53 | Depth, Head Location | 8.0 |
D51 | Diameter, Sprue Bush Location | 32.12 +.05 -.00 |
D52 | Diameter, Heater Clearance Hole | 52.0 |
D53 | Diameter, Head Location | 70.1 +.05 -.00 |
R52 | Radius, End of Heater Clearance Hole | 4 |
A52 | Angle, End of Heater Clearance Hole | 30 degrees |
Back Plate & Insulation Plate | ||
LB | Thickness, Back Mounting Plate | 25 |
LP | Thickness, Insulation Plate | 6 |
L62 | Depth, Location Ring Anchor | 8.0 |
D61 | Diameter, Bush Head Clearance | 70.5 +.1 -.0 |
D62 | Diameter, Location Ring Clearance | 110.0 + .1 -.0 |
D63 | Diameter, Location Ring Clearance, Insulation | 111 |
Moving Die (Mono & Duo Tips Only) | ||
L71 | Depth, Sprue Tip Location | 50.00 +.05 -.00 |
D71 | Diameter, Sprue Tip Location | 40.00 +.05 -.00 |
Ejector Pins | ||
Mono - Diameter x quantity, location | 6mm x 1, 12mm from centre | |
Duo - Diameter x quantity, location | 6mm x 2, 12mm from centre | |
Water Cooling of Sprue Tip | ||
Note that cooling can be from the back or from the side. If connecting from the side, clearance holes are as below. | ||
L81 | Depth, Water Fitting Clearance Hole 1 | 12.0 |
L82 | Depth, Water Fitting Clearance Hole 2 | 32.0 |
D82 | Diameter, Water Fitting Clearance Holes 1 & 2. (Nominal. To suit fittings) | 12 |